Floor scrubbers run into thousands of dollars in cost. However, they are necessary cleaning equipment on which many cleaning companies rely.
However, cleaning crews can encounter difficulties if these devices are poorly maintained. Companies may be confronted with downtime, inconveniences, costly repairs, or even replacement.
Nevertheless, if a floor sweeper scrubber is well-maintained, it should last very long, perform better, and deliver the required services.
Here are some practical tips to help assure durability for a floor sweeper scrubber and keep them performing well for much longer.
1. Make sure to drain and clean the different parts
Tanks, hoses, and filters need to be cleaned and inspected routinely. This is an essential requirement for ensuring durability. Empty and clean the solution and recovery tanks after each use. Ensure that the filters and hoses are spotless after each use.
At the same time, inspect hoses and seals for cracks or wear. Moreover, tanks and supply lines should be cleaned and deodorised. Use the directions in the owner’s handbook.
Unpleasant scents are usually a result of dirty tanks; therefore, it is imperative to run tank checks and deodorise them regularly.
2. Regularly clean brushes and pads
Floor scrubbers typically clean the floor using brushes or pads. When purchasing a floor scrubber, ensure that it is easily reachable to employees for removal and re-attachment since they are vital components in daily maintenance.
Moreover, check how easy it is to access the bottom of the floor scrubber portion. This is because if one wants to retain their floor scrubber for a long time, it must be cleaned regularly.
The machine will function most effectively if the pad and brush remove extra dirt and debris. It will also limit the possibility of cross-contamination across tasks, mainly if the equipment is utilised in many areas or facilities.
3. Recharge the battery
There are several floor sweeper scrubber models that come with built-in battery chargers. This enables charging of the equipment at any 120-volt socket. However, remember that while the machine runs, it cannot be hooked into an onboard battery charger.
Be mindful not to overload the batteries or opportunity charge. Charging batteries before they hit their lowest charge is known as opportunity charging.
Moreover, only charge batteries once the entire cleaning operation has been completed. Alternatively, charge the device when the batteries are less than the suggested charge capacity, generally 20%.
4. Read the instruction manual
Always read the owner’s manual. Each machine’s handbook will provide specialised floor sweeper maintenance and operating instructions. Different types and designs will necessitate different tactics. Thus, one of the most useful things that cleaning crews can do is study the handbook and learn about the specifications and care instructions of the machines.
Moreover, lubricate hinges and wheels as well. Apply a suitable lubricant to all-wheel housings, chains, and pivot points to ensure that the parts continue to move well.
To sum up
The commercial floor scrubbers market was valued at $3.6 billion in 2019 and is predicted to grow at a rate of 5.1% over the next few years. And while the increased manufacturing may bring its cost down, they are still a hefty investment for most cleaning businesses.
Therefore, keeping them in check through frequent tank sanitisation, cleaning pads and brushes, and only recharging the device at the correct time and when not in use is vital.
Most importantly, always follow the instruction in the manual when operating or cleaning the floor scrubber. If not anything, these tips will extend the life of the device enough for one to get their money’s worth!